Fire Extinguisher Cylinder + Valve + Dip Tube + Pressure Gauge + Bottom Base Full Set available
We have attained ISO9001:2000, CE, EN3, EN1869 and EN694 certifications. Almost all products that we provide are manufactured and tested according to the international standard. We also supply OEM service, we can design and produce the products as client's special request.
1. Item name: Small pressure gauge for fire extinguisher
2. Size: 1.25'' or 1.5''
3. Pressure range: 0-700psi
4. Application:for testing pressure of air
Product Name | Small pressure gauge for fire extinguisher |
Case Material | stainless steel |
Color | silver |
Pressure range | 0-700psi |
Size | 1.25'' or 1.5'' (can be customized) |
Accuracy | 2.5% |
Thread | 1/8NPT or customized |
Used | To test pressure of air systems |
How to use :
1. Pull the Pin at the top of the extinguisher. The pin releases a locking mechanism and;will allow you to discharge the extinguisher.
2. Aim at the base of the fire, not the flames. This is important - in order to put out the fire, you must extinguish the fuel.
3. Squeeze the lever slowly. This will release the extinguishing agent in the extinguisher. If the handle is seleased, the discharge will stop.
4. Sweep from side to side. Using a sweeping motion, move the fire extinguisher back and forth until the fire is completely out. Operate the extinguisher from a safe distance, several feet away, and then move towards the fire once it starts to diminish.
5. Be sure to have read the instructions on your fire extinguisher